Oct 22, 2014

Charging Station - Free Cut List and Diagrams


A while ago, I posted pictures of my Charging Station.  Today, I give you a cut list and Diagrams.


Finished Dimensions:
7 3/4" H x 14" W x 12 1/4 " D
Notes:
This charging station was built using scraps I had on hand.  The measurements below, reflect the measurements of those scraps.  This plan could be modified to suit a variety of material thicknesses.  Please make any necessary adjustments for material widths before cutting out your pieces.  

Warning:  Some chargers and devices produce quite  bit of heat.   Build at your own risk.


**There may be a tutorial or additional plans for using new wood in the future, please check back.**

Materials:

  • Scraps, I used scrap 1 x10 boards, 1/4" ply and some hobby boards.
  • glue
  • nails
  • 2 small hinges


Cut List: 
From 3/4 " plywood or board 

  • 2-7 3/4" x 12 1/4" (will become sides)




 From 1/4" ply 

  • 1 -5 3/4" x 13" middle shelf
  • 1 - 9 7/8" x 13 bottom shelf


From 3/8 ply or board

  • 3 3/4" x 12 1/2" back
  • 1 - 4" x 12 3/8" top shelf
  • 2 - 3 3/4 x 3 7/8 dividers



Don't miss my other free plans!




No comments:

Post a Comment

Thank you for visiting and taking the time to comment. I moderate all comments. Please allow up to 24 hrs. for your comment to appear.

- Amy